|
  
Floor Tile: ADIGE/2.0 Colour:06 |
|
Sizes Available: 
300x300mm, 300x600mm, 450x450mm, 600x600mm, 200x1200mm, 600x1200mm, 50mm mosaic
Finishes Available:
Natural (Matt) Finish: Slip Resistance Rating = R9
Structured Finish: Slip Resistance Rating = R11 (Barefoot rating 'C')
Polished Finish: Slip Resistance Rating = N/A
Examples of Colours Available:
|
| Disclaimer: The various finishes and sizes shown are not necessarily available in all colours. For specific information on size, finish and colour availability, please contact a PROSPEC representative. |
Product Type : Unglazed Porcelain Stoneware
Finishes and Suitability:
| Finishes : |
Natural (Matt), Structured, Polished |
| Natural (Matt) Suitability : |
Interior/Exterior use for Walls & Floors |
| Structured Suitability : |
Interior/Exterior use for Walls & Floors |
| Polished Suitability : |
Interior Floors Only. Interior/Exterior Walls |
Areas of Use - Product Suitability:
| Domestic |
Kitchens, bathrooms, conservatories, etc |
|
| Residential |
Hotels, housing, etc |
|
| Public Areas - Light |
Restaurants, offices, shops, etc |
|
| Public Areas - Heavy |
Shopping Centres, supermarkets |
|
| Commercial |
Airports, high density traffic areas, etc |
|
| Industrial |
Heavy Industrial Areas. |
|
|
|
|
TEST STANDARDS |
Slip Resistance
Natural(Matt) Finish: Slip Resistance Rating
Structured Finish: Slip Resistance Rating
Polished Finish: Slip Resistance Rating |
= R9
= R11 (Barefoot Rating 'C')
= N/A |
|
DIN 51130
( )=DIN 51097
|
Surface Hardness
Natural (Matt) Finish: MoHs Rating
Structured Finish: MoHs Rating
Polished Finish: MoHs Rating |
= 7-8 (Conforms)
= 7-8 (Conforms)
= N/A (Conforms) |
|
EN 101 |
Water Absorption
All Finishes: Conforms (acc to test criteria) |
EN 99 |
Acid & Alkali Resistance
All Finishes: Resistant (acc to test criteria) (Conforms) |
EN 106 |
Thermal Shock Resistance
All Finishes: Resistant (acc to test criteria) (Conforms) |
EN 104 |
Frost Resistance
All Finishes: Resistant (acc to test criteria) (Conforms) |
EN 202 |
Deep Abrasion Resistance
All Finishes: (less than) <150mm 3 (Conforms) |
EN 102 |
Bending Strength
All Finishes: 40 - 55 N/mm 2 (Conforms) |
EN 100 |
|
